2.4G & 5.8G Wireless Rate 3100M Qualcomm 5G CPE WIFI Router

Description

 *  5G Cellular 
Built-in Qualcomm SDX55 modem, it has best 5G mobile network performance and works with integrated world-wide 5G to 2G
multi-mode.
 *  Wi-Fi 6 (802.11ax)
The revolutionary Wi-Fi technology with OFDMA and DL MU-MUMI, faster wireless line，more client connection, lower latency, best
network efficiency.
 *  Higher Wireless Capacity
Dual-band 6 spatial streams, the CPE outputs 3100Mbps wireless bandwidth (600 + 2475), makes you peace of mine while enjoy UHD
videos, online games at the home rush hours. It’s the future-proof investment absolutely
 *  Hybrid MESH+ Networking
The CPE inherits the mesh technology and supports “wired / wireless” hybrid networking. It’s so convenient to cover all corners
and dead-zones by adding one more MESH+ node (another series of router). it improves the deployments of wireless network and
optimized the seamless feature.

Specification

 *  5G Cellular 
 1) 5G SoC: Qualcomm Snapdragon X55 Modem-RF System
 2) 5G Network Modes:FDD, TDD, SA (standalone), NSA (non-standalone)
 3) 4G Techs: LTE FDD, LTE TDD including CBRS support, LAA, LTE Broadcast
 4) 5G Standards:3GPP Release 15
 5) 5G Transmission Speed:2.5Gbps/1.25Gbps (up to ISPs)
 6) 4G Transmission Speed:1.6Gbps/150Mbps (up to ISPs)
 7)  Antenna:built-in 5G/4G Main / Diversity antennas
 *  WiFi Feature
 1) Working Radio: #1: 600Mbps @ 2.4GHz; #2: 2475Mbps @ 5.0-5.8GHz
 2)  Coding Technology:1024-QAM / OFDMA
 3)  Peak Connections:>500+ Clients
 4)  Wi-Fi Standard Conformance:WiFi6 and 802.11ac / 802.11n backward
 5)  Antenna: built-in 6 pcs high performance antennas with 12 pcs external FEM components.
 *  Data Switching
 1)  Mobile 4G/5G Connection (Support APN)
 2)  Giga Ethernet Connection
 3)  MESH:MESH+ hybird 
 4)  4G/5Ghz WiFi
 5) Advanced Firewall 
 6)  MAC Filter
 7)  WiFi Sercurity 
 8) VPN Passthrough and VPN Client (L2TP PPTP)
 9)  IPV4/IPV6
 10)  WEB / APP Mangement
 11)  Firmware upgrade
 *  Hardware Specification 
 1)  CPU: Quad-core CPU @ 1.0 GHz
 2)  Memory:16MB Flash + 128MB NAND + 2* 256MB DDR3 
 3)  Ethernet:1* Wan/LAN 1Gbps ,1*LAN 1Gbps,1*LAN 2.5Gbps,1* SIM Slot（Nano-SIM）
 4) Reset & Sync button (re-use)
 5)  LED Indicator
 6)  Working Status (breathing light)
 7)  4G Status
 8)  5G Status
 9) Internet Status
 10) General
 11)  Power Consumption:<23W
 12) AC/DCP Power Supply:AC:100V-240V 50Hz/60Hz, DC:12V/2A
 13)  Working temperature:0℃～40℃, Storage temperature: -20℃～+70℃
 14)  Humidity:5%～95%
 15)  Dimensions:108X108X216MM
 16)  Weight: TBD
 17)  What’s in the package?
 18)  One (1) 5G CPE Router (M01MX)
 19) One (1) 1m Cat5e Ethernet cable 
 20)  One (1) Power Adapter
 21) Quick start guide
 Note: Maximum wireless signal range derived from IEEE standard 802.11 specifications. Actual data throughput and data over distance
will vary. Network conditions and environmental factors, including volume of network traffic, building material and construction,
and network overhead, result in lower actual data throughput rate and wireless coverage.

FAQ

How I should restart the MESH+ WiFi System

The correct steps are:

1. a) Re-plug the power adapter of router and wait two minutes to restart.
2. b) Re-plug the power adapter to mode and wait two minutest to restart.
3. c) Press the Sync button on both router and node if the MESH+ network cannot be created correctly.

Why I can’t connect the MESH+ WiFi System

1. a) Enable the WiFi function of computer and smartphone.
2. b) Input the correct WiFi network name (SSID) and password, it must match with router settings exactly.
3. c) The computer and smartphone must not be blocked by the access control list.

How I can setup the network settings in correct method

1. a) We suggest you set the computer or smartphone obtain the dynamic IP address automatically from router, called “DHCP” feature.
2. b) Change the computer or smartphone address manually and match the IP address segment as same as the router settings. E.g. Router “192.168.1.1 / 255.255.255.0”, computer or smartphone “192.168.1.10 / 255.255.255.0”.

Why MESH+ connection cannot create

1. a) Make sure that ID code on the label of router and node is exactly same.
2. b) Press the sync button to match the system manually. Especially you buy the separate node and would like to add it into current system.
3. c) Move the node closer to the router and assure the strong enough wireless signal to create MESH+ network.
4. d) Query the LINK LED INDICATOR table to determine whether the MESH+ network created and worked well

Application

Accessories